Introducing the Auto Motion Setting Panel

Auto Motion Setting Panel

Sound Wave Display

To display the current sound wave and the threshold value (parallel horizontal blue lines).

Preview Pane

To preview the motion results responding to the settings you adjust.

Basic Tools

Load Current Actor & Audio: Click this button to load the current actor and audio for adjustment and previewing.

Load Sample Actor & Audio: Click this button to load the embedded actor (Scientist) and audio for adjustment and previewing.

Audio On/Off: Press up or down this button to preview with or without voice.

Setting

To determine the global behavior of the auto motions.

Preview

Click this button to play back in the preview pane.

Apply

Click this button to apply the motion to the current actor and its audio when you are satisfied with the motion result shown in the preview pane.

Mode Indicator

These labels indicate that the current actor has been applied a voice in Talk or Listen modes.

Auto Motion Setting Panel - Global

1	Reset	Resets all of the values of the settings in the Global and Parts tabs.
2	Sound Wave Display	Displays the current sound wave and the threshold value (parallel horizontal blue lines).
3	Preview Pane	Previews the motion results according to your setting adjustments.
4	Basic Tools	Open Profile: Click this button to load a custom Auto Motion Settings profile (.ct7AutoMotion). Save Profile: Click this button to save the current Auto Motion Settings* as a profile (.ct7AutoMotion). Load Current Actor & Audio: Click this button to load the current actor and audio for adjustment and previewing. Load Sample Actor & Audio: Click this button to load the embedded actor (Scientist) and audio for adjustment and previewing. Audio On/Off*: Toggle this button on or off to preview with or without voice.
5	Reaction Settings	Determines the global behavior of the auto motions.
6	Mode Settings	Use these two radio buttons to switch the current auto motion to talk or listen mode.
7	Motion Settings	Blends a motion clip into the current reactive auto motion generated with the settings in the panel.
8	Preview	Click this button to play back in the preview pane.
9	Apply	Click this button to apply the motion to the current actor and its audio when you are satisfied with the motion result shown in the preview pane.

Auto Motion Setting Panel - Parts

1	Reset	Resets all the values of the settings in the Global and Parts tabs.
2	Sound Wave Display	Displays the current sound wave and the threshold value (parallel horizontal blue lines).
3	Preview Pane	Previews the motion results according to your adjusted settings.
4	Basic Tools	Open Profile: Click this button to load a custom Auto Motion Settings profile (.ct7AutoMotion). Save Profile: Click this button to save the current Auto Motion Settings* as a profile (.ct7AutoMotion). Load Current Actor & Audio: Click this button to load the current actor and audio for adjustment and previewing. Load Sample Actor & Audio: Click this button to load the embedded actor (Scientist) and audio for adjustment and previewing. Audio On/Off*: Toggle this button to preview with or without voice.
5	Candidate Parts	Click the facial features in this pane to adjust them further.
6	Selected Part Name	Displays the name of the currently selected part.
7	Detail Settings (for Selected Part)	Drag the sliders to determine the moving direction and strength of the selected part.
8	Preview	Click this button to play back in the preview pane.
9	Apply	Click this button to apply the motion to the current actor and its audio when you are satisfied with the motion result shown in the preview pane.
10	Anticipation / Follow-through	Set a value to determine whether the reaction motions occur before or after their corresponding peaks of the sound wave. A positive value means the motion will be delayed, while a negative value indicates the motion will occur early. Please note the unit is Frame.
11	Ping-pong Effect	Activate this box to create a back and forth movement pattern when the sound wave passes through the threshold.
12	Mirror / Copy Settings	Copies or mirrors the motions for eyeballs and shoulders from one side to another. You can quickly set the same or opposite values to the other side of the select part by clicking one of these two buttons.